Fix Machine During Transportation; Remove Fixture; Storage - Sharp V-1 General & Electrics Manual

SHARP

2.3 FIX MACHINE DURING TRANSPORTATION

Ensure to fasten all the loosen parts firmly inside the crate before transportation.

2.4 REMOVE FIXTURE

Ensure to remove all the fixtures listed below before operating the machine
1. Remove the wooden block under the headstock.
2. Remove the fixture which fix the working table.
3. Remove all fixtures on the machine.

2.5 STORAGE

2.5.1 STORAGE WITH THE MACHINE PACKED
1. Ensure to fasten all the loose parts and have an anti-rust treatment of the machine.
2. Ensure to fix the machine firmly inside the crate to prevent the machine move from
falling.
3. Ensure to enclose the machine with a waterproof cover to keep this machine from
moisture or corrosive substance. It prevents the mechanical and electrical parts from
damage.
4. Ensure to put an anti-moisture substance inside the crate.
5. Do not place the whole packing directly under the sunlight or near any other heat
source.
6. Keep away from any corrosive substance or any equipment causing abnormal vibration.
7. The ambient temperature and moisture should be moderate and kept as constant and
smooth as possible.
V-1 KNEE MILL GENERAL MANUAL
CH2-7 KRDM24C0 V4.0S