Electrical Requirement - Sharp V-1 General & Electrics Manual

SHARP

3.4 ELECTRICAL REQUIREMENT

This machine should be installed under the right electrical environments.
WARNING!!!
Before connecting the power wires, make sure the voltage is the same for both
the machine and the plant power.
3.4.1 POWER SUPPLY
1. Ensure all the associated connections and wiring are appropriate, that is, connections
and wiring should conform with the local safety rules at least.
2. Ensure to install a adequate current-fault breaker ( see 3.4.5 ) prior to the power supply
switch or transformer of this machine.
3. Thread the power supply cable through the cable inlet positioned at the lower right
side of the machine, rest the cable upon the electric cabinet frame, then connect the
cable to the main power supply switch of this machine.
V-1 KNEE MILL GENERAL MANUAL
CH3-7 KRDM24C0 V4.0S