Lifting With The Machine Packed - Sharp V-1 General & Electrics Manual

SHARP

2.2 LIFTING WITH THE MACHINE PACKED

2.2.1 SAFETY RULES FOR MACHINE LIFTING
The following safety rules must be absolutely followed when lifting and/or moving the
machine
1. Ensure all the parts of the machine are fully secured before lifting or moving it.
2. Use a forklift of sufficient capacity to raise or move the packed or machine.
3. Pay special attention to machine balance while lifting.
4. Have another person to help guide the way while lifting the machine.
5. Make sure the forks of the forklift protrude past the far edge of the machine bottom.
6. Do not raise the machine too high as this may cause a loss of stability.
7. The forklift should be driven by experience personnel.
V-1 KNEE MILL GENERAL MANUAL
CH2-4 KRDM24C0 V4.0S