Mechanical Adjustment - Sharp V-1 General & Electrics Manual

SHARP

6.1 MECHANICAL ADJUSTMENT

Ensure to turn off the main power supply and put warning signs on visible spots before
inspecting the belt tension. Do not touch or reach over the pulleys and the belts if the power is
still on. Otherwise this might result in squeeze to wounded and disabled.
6.1.1 NOTICES
1. Check the pressure readings regularly to make sure all the system pressures setting
are normal.
2. Observe regularly if there is any abnormal noise arising inside the rotating motors and
other moving or rotating parts.
3. Moving or rotating parts are lubricated properly.
4. Ensure all the safety guards and safety equipments are installed properly.
5. Adjust the belt tension based on the tension value given in the maintenance manual.
V-1 KNEE MILL GENERAL MANUAL
CH6-2 KRDM24C0 V4.0S