Sharp V-1 General & Electrics Manual page 24

SHARP
(11) S-S1110
Lightning Mark-S
(12) S-S1123
ISO 68
(13) S-S1071
Safety Warning
NOTE!!!
On the MILL machine there are shipping brackets the hold the machine head,
ATC and axes in place during shipping. These brackets must be removed before
operating the machine. Do not discard the shipping brackets.The shipping brackets
must be replaced if the machine is ever moved.
V-1 KNEE MILL GENERAL MANUAL
CH1-13 KRDM24C0 V4.0S