Operator Safety; Health And Safety At Work - Sharp V-1 General & Electrics Manual

SHARP

1.1 OPERATOR SAFETY

Safety devices are installed in this machine to protect the operator from in injury.
However, this machine is fast, powerful machine can be dangerous if used under improper
circumstances.
Please read the following health and safety guidance notes and understand how to
operate the machine before using the machine.
WARNING !!!
The machine is equipped with safety devices. Do not change any safety devices
on this machine. If changes to these safety devices are made, the manufacturer and
our OEM partner will not be responsible for any ensuing issues of product liability.
This action will also invalidate any remaining warranty entitlement."

1.2 HEALTH AND SAFETY AT WORK

In accordance with the requirements of the Health and Safety at Work, this manual
contains the necessary information to ensure that the machine tool can be operated properly
and with safety. It is assumed that the operator has been properly trained, has the requisite
skill and is authorized to operate the machine, or, if undergoing training, is under the close
supervision of a skilled and authorized person.
Attentions are drawn to the importance of compliance with the various statutory
regulations, which may be applicable, such as "The Protection of Eyes Regulations". It is
further stressed that good established workshop practice is essential.
Adequate information is also provided to enable the machine to be properly serviced and
maintained by persons with the necessary skills and authority.
V-1 KNEE MILL GENERAL MANUAL
CH1-2 KRDM24C0 V4.0S