Sharp V-1 General & Electrics Manual page 84

SHARP
7.3.1.2 OIL GUIDE TABLE D (FOR MILLS )
Lubricant Position
Lubricant
Characteristic
Lubrication Method
Replace& add Period
Tank Capacity
Recommended
Grade of Oil
WARNING!!!
Ensure to use the recommended fluids as listed in the oil guide table.
7.3.2 AUTO CENTRALIZED LUBRICATOR (OPTIONAL)
A warning system is designed to notify users of checking and filling up the slideway
lubricator. Please fill up the tank immediately when the warning alarm message is shown.
The warning alarm will be continuing if the warning status is not released. Ensure to check
the centralized lubricator weekiy at least, and fill up the tank if necessary. Recommended
lubrication oil is listed in the oil guide table 7.3.4.1 and 7.3.4.2.
Tool Release
Drawbar
Viscosity ISO VG32
ŁAnti-rust,
anti-oxidation
ŁGood Stability
Centralized Lub
Once Weekly
As needed
---
BP Energol HLP
32 AW
ŁMobil DTE Light
ŁShell Tellus 32
ŁChevron Hydraulic
Oil AW32
ŁBECHEM Staroil
NR 32
CH7-5
V-1 KNEE MILL GENERAL MANUAL
KRDM24C0 V4.0S