Sharp V-1 General & Electrics Manual page 18

SHARP
16. Beware of irregular shaped workpieces.
17. Beware of large burrs on workpieces.
18. Always select the correct tool for the job.
19. Do not run the machine unattended.
20. Do not use tools without handles.
21. Always support the workpiece as necessary-using vice.
22. Do not rush work.
23. Never substitute for the wrong size tools if the correct sized tool is not available or
cannot be located in the shop.
24. Do not move guards while the machine is under power.
25. Do not place hand or body in path of moving objects.
(a) Beware of moving machine parts that can fall.
(b) Be aware of where you are moving your hand or body in relationship to the
machine.
(c) Be aware of hands or other parts of the body that may be in position to be hit by
a spindle or workpiece.
26. Know the function of each and every control.
27. Never place hand on spindle or workpiece.
28. Make sure power has been turned off when the machine is unused for some time.
29. Never start spindle with tool key in the tool.
30. Do not allow distractions to interfere with machine operations.
31. Do not operate machine while talking.
32. Beware of machine dangers when attending to other aspects of machine operation.
33. Beware of loose clothing near the rotating parts of the machine.
34. Beware of loose hair near the rotating parts of the machine.
V-1 KNEE MILL GENERAL MANUAL
CH1-7 KRDM24C0 V4.0S