Adjustment Of Headstock Gib - Sharp V-1 General & Electrics Manual

SHARP
V-1 KNEE MILL GENERAL MANUAL

6.4 ADJUSTMENT OF HEADSTOCK GIB

The taper gib " A" is used for adjusting precision of knee moving. The screw " B " is used
for setting the gib. When adjust the gib, turn the screw counterclockwise to loose the gib a
little, then turn the screw clockwise to adjust the gib until the knee move smooth and precisely.
WARNING !!!
Ensure to check gib every month. Otherwise might result the machine out of
accuracy.
CH6-4 KRDM24C0 V4.0S