Sharp V-1 General & Electrics Manual page 33

SHARP
2.5.2 STORAGE OF THE BARE MACHINE
1. Ensure to fasten all the loose parts and have an anti-rust treatment of the machine.
2. Ensure to fasten all the sliding guards and doors to prevent from moving even falling.
3. Ensure to enclose the machine with a waterproof cover to keep this machine from
moisture or corrosive substance. Otherwise might cause the mechanical and electrical
parts damage.
4. Ensure to put anti-moisture substance inside the electric cabinet, operating panel, and
any other enclosure of this machine.
5. Do not place the machine directly under the sunlight or any other heat source. Keep
away from any corrosive substance or any equipment causing abnormal vibration.
The ambient temperature and moisture should be moderate and kept as constant and
smooth as possible. Otherwise might cause the mechanical and electrical and
electrical parts damage.
6. Ensure all the power supplies are off and the main power supply cables are taken off
before put the pack in store.
V-1 KNEE MILL GENERAL MANUAL
CH2-8 KRDM24C0 V4.0S