Sharp V-1 General & Electrics Manual page 57

SHARP
4.6.3 SWIVEL TURRET
To swivel turret, the procedures below must be following:
1. Use spanner to unlock the 4 bolts.
2. Swivel the turret to the required location that you need an
3. Lock the 4 bolts.
4.6.4 MOVE RAM SLIDE
To move ram slide, the procedures below must be following:
1. Release the two setting screws
2. Use spanner C to move ram slide.
3. Lock the setting screws B and A .
A and B .
CH4-8
V-1 KNEE MILL GENERAL MANUAL
KRDM24C0 V4.0S