Operating Safety Precautions - Sharp V-1 General & Electrics Manual

SHARP

1.7 OPERATING SAFETY PRECAUTIONS

1. Never use the machine without adequate lighting or if the machine light is broken.
2. The floor could become slippery because of the spilt water or oil and cause accident.
Ensure the floor is clean, dry and orderly.
3. Keep the machine and work area clean and orderly.
4. Always provide an ample working space.
5. Keep all guards and cover plates in place and all machine cabinet doors closed.
6. Never lay anything on the working surfaces of the machine, where it may be fouled with
rotating or moving parts.
7. Do not touch or reach over moving or rotating machine parts.
8. Do not touch any switch without care.
9. Ensure you know the function of the switch and how to use it before using it.
10. Do not operate the machine in excess of its rated capacity.
11. Stop the machine immediately if anything unexpected happens.
12. Ensure that you know how to stop the machine before starting it.
13. Eye protection must be warn by the operator and all exposed persons operating these
machines.
14. Beware to reset the coordinates after you take over the machine unless it is not
necessary due to common coordinates when several people share the machine
operation.
15. Isolate machine when leaving it unattended.
V-1 KNEE MILL GENERAL MANUAL
CH1-5 KRDM24C0 V4.0S