Power Supply Unit (Psu); Ac Input; Output Specification - Barco F90 Service Manual

16. POWER SUPPLY UNIT (PSU)

16.1 AC Input

There are two versions of the power supply. The first few units of the projector is equipped with 504-0613-00.
This powersupply is certified for 240V only, and will reduce output (laser) power when used with 110V.
There is no rating label on the PSU. The ratings are described on the projector label.
504-0613-xx
R7681400
16.2 Output specification
The output connectors contain output voltages from 5 different internal converters.
Below is the specified output voltage and output current capacity of each converter.
Output Name
11,5V_STB
12V-1
12V-2
24V
Laser driver supply
723–0016 F90 01/12/2017
Part Number PSU
Voltage Level
11,55V +/- 2,6%
(11,25 — 11,85V)
12,36V +/- 3,45%
(11,94 — 12,8V)
12,36V +/- 3,45%
11,91 — 12,8V)
24V +/- 1V
380V +/- 3,42%
(367 — 393V)
16. Power Supply Unit (PSU)
110-240V, 50-60Hz, 12A (For projector label only. No rating on
PSU label)
110-240V, 50-60Hz, 16-12A (For projector label only. No rating
on PSU label)
Capacity
0,4A
10A
8,64A
10A
4,13A
Rating
Connector used
Mainboard
Mainboard
Thermal Hub
Thermal Hub
Laser Driver
59