Lens Shift Assembly Motors - Barco F90 Service Manual

24. Lens shift assembly
Image 24-2

24.1 Lens shift assembly motors

1. Remove 4 screws (M3x8 TX10 W/Lockw.) to remove lens shift motors with lead screw from lens shft assy.
Dependent on the position of the lens shift mechanism, it may be necessary to manually turn leadscrew to
expose the screws (8mm hex). Accessing these, removal of complete assembly is necessary.
2. Remove 4 screws (M3x8 Tx10) to release lens shift motor from holder.
- Motor for horizontal shift (left) connects to PCB lens hub connector J1
- Motor for vertical shift (lower) connects to PCB lens hub connector J2
Image 24-3
124 723–0016 F90 01/12/2017