Technical Operations; Pcb Bracket Bottom And Bracket Fan; Pcb Main - Barco F90 Service Manual

26. TECHNICAL OPERATIONS

26.1 PCB Bracket bottom and Bracket fan

About
This section outlines replacement of parts without any pre-defined life cycle.
A. SwThermal PD Left Loop (Small cable)
B. Ctrl LD left (Larger)
C. CW (Largest)
D. SwThermal PD Right (Small)
E. Ctrl LD right (Larger)
F. PW_R (Largest)
Cable Routing
1. Switch Thermal (Bimetallic witch loop1), Laser Driver 1 Output &
Comm. Phosphr wheel 1.
2. Switch Thermal (Bimetallic witch loop2), Laser Driver 2 Output &
Comm. Phosphr wheel 2.
3. Cables from Fans in Frame radiator rear, Cables form Frame Radiator
4. Cables from two radiator fans.
5. Remove 14 screws (T10 M3x6) and lift out PCB Bracket bottom.

26.2 PCB Main

1. Remove 10 screws (Tx10 M3x6) to release bracket PCB Top
2. Disconnect all cables, remove 8 screws (Tx10 M3x6) on top of PCB main.
723–0016 F90 01/12/2017
1. Remove the 7 screws (T10 M3x6) releasing PCB Bracket.
26. Technical Operations
133