Pcb Laser Drivers; Remove The Laser Driver Cage - Barco F90 Service Manual

1. Disconnect the PSU cables.
2. Remove the 8 screws (Tx10 M3x6) securing the PSU in place.
3. Lift the PSU out of the chassis.
Image 26-9

26.5 PCB Laser Drivers

The two laser drivers are stacked in a cage. Each of the drivers can be removed separately in the unlikely
event of malfunction. The complete assembly (laser driver pair) can be removed to gain access to other parts
of the projector.

26.5.1 Remove the Laser driver cage

1. Disconnect the 12 Molex connectors.
Image 26-10
2. Remove 4 screws TX10 (Tx10 M3x6) 2 pcs on the Black PCB Hub board bracket and 2 securing Fan Laser driver to the bottom.
3. Remove 6 pcs screws (Tx20 M4x8) securing Laser driver cage to Bottom assy
723–0016 F90 01/12/2017
26. Technical Operations
137