Phosphor Wheel; Replace The Phosphor Wheel Assy; Entering Prospector Diagnostic Tool; Calibrating The Phosphor Wheel - Barco F90 Service Manual

12. PHOSPHOR WHEEL

Overview
•

Replace the phosphor wheel assy

•

Entering Prospector diagnostic tool

•

Calibrating the phosphor wheel

12.1 Replace the phosphor wheel assy
See chapter "Phosphor wheels (2 pcs)", page 87
12.2 Entering Prospector diagnostic tool
Prospector Tool
To access the web interface, use a web browser and enter http//xxxxxx:9999, where xxxxxx is the IP address for the projector, and
9999 are the code for entering Prospector. As an example: http//192.168.1.100:9999.
The IP Address for the projector is displayed in the OSD Menu: System/Setting/Communication/LAN.
The following screen will appear; you are now working in Prospector.
Image 12-1
12.3 Calibrating the phosphor wheel
The calibration of the Phosphor wheels is performed via the Prospector application in the projector.
723–0016 F90 01/12/2017
12. Phosphor wheel
49