Laser Safety; Warning Labels - Barco F90 Service Manual

3. Important Safety Instructions
3.8

Laser Safety

W
ARNING
Do not stare into beam. This projector has a Class 4 laser cluster. Do not attempt to disassemble or modify
this projector.
Special precautions have to be taken in order to protect persons and environment. Laser radiation is defined
as harmful to persons and objects, and must be handled according to instructions given.
All power must be switched off during service and replacement of optical components.
After reassembly of Cluster, Laser interface and TI Loop, the unit must be properly tested against leak of light
due to improper reassembly of the parts.
This test must take place in a closed area / room, with only service personnel present. The area / room must
have safety signs and warnings indicating that there is a restricted / danger area, with access only to certified
personnel. Protective googles has to be used by persons inside the test area.
3.9

Warning Labels

Warning Labels
Warning labels are positioned inside the projector, where extra Safety precautions are necessary.
Image 3-1
Image 3-3
High voltage warning. Located on the Powersupply.
12
:
Class 1 laser RG2 Product. This projector may become RG3. Refer User Manual before operating.
Image 3-2
723–0016 F90 01/12/2017