Pcb Thermal Hub Board - Barco F90 Service Manual

26. Technical Operations
Image 26-1
3. Remove 5 screws (T10 M3x6) in rear cover and lift out PCB main.
Image 26-3

26.3 PCB Thermal Hub board

To allow easier access during the following procedures, the PCB lens hub board including bracket Hub board
top and bottom can be removed.
1. Disconnect all cables, remove 4 screws (Tx10 M3x6)
2. Release 2 screws (Tx10 M3x8) towards the lens.
Image 26-4
3. Release 7 screws (Tx10 M3x6) and remove Bracket Hub Top.
4. Remove 8 screws (Tx10 M3x10), disconnect all cables and remove the board.
134
Image 26-2
723–0016 F90 01/12/2017