Service; Version Table; Lamps And Power Supply - Barco CineVERSUM 110 Owner's Manual

15. SERVICE

Overview
•

Version Table

•

Lamps and Power supply

• Board Identification
• Diagnostics
15.1 Version Table
What is possible ?
To get an overview of the different software and firmware version inside the projector.
How to get the version table
1. Press MENU to activate the menu bar. (image 15-1)
2. Press → to select the Service item.
3. Press ↓ to pull down the menu.
4. Use ↑ or ↓ to select Version table....
5. Press ENTER.
An options dialog box opens. (image 15-2)
Image 15-1
Version table
Default program
Default program Backup
BootCode
Standard program
Standard Cpu Config
Standard Cpu Config Backup
PMP Config1
PMP Config2
Backplane Config
Character map
Image 15-2
15.2 Lamps and Power supply
What is possible ?
To get an overview of the firmware version of the µC and the measured temperatures.
How to get the lamps and power supply overview ?
1. Press MENU to activate the menu bar. (image 15-3)
2. Press → to select the Service item.
3. Press ↓ to pull down the menu.
R5976697 CINEVERSUM™ 110 12/05/2004
01.00
01.00
01.00
01.00
01.00
01.00
01.00
01.00
01.00
01.00
15. Service
131