Image 23-7
23.4 Folding Mirror assembly
In some F90-W13 units the complete mirror assembly cannot be removed without lifting the entire optical
engine 10mm as the mirror conflicts the bottom base plate.
Mirror can also be removed with mirror assembly mounted inside the Illumination Engine.
In order to access screws releasing mirror, complete engine Core including lens shift must be removed.
Mirror adjustment may be needed after this procedure.
23.4.1 Removing Folding Mirror assembly
1. 1. Remove 3 screws (TX8 M2.5x6) and lift out mirror assembly.
2. 2. To release mirror, push mirror towards the clips to release mirror from the two retainers.
Image 23-8
Note: The rear side of mirror has a bluish reflection. This shall face down towards mirror frame.
723–0016 F90 01/12/2017
Image 23-9
23. Illumination Engine front
121