22. TI Loop
Image 22-7
22.2.5 Mirrors Blue
1. 1. Use the wedges to gently pull out the blue mirrors.
Note: The outer wedge holding first blue mirror is modified in order to not conflict with the Top Cover.
The red mark on the blue mirror should point INWARDS as shown in picture.
Image 22-9
22.2.6 390 Blue loop lens 3
1. 1. Remove screw (Tx08 M2.5x6)
2. 2. Remove the clip holding lens in place.
3. 3. Lift out the lens.
Note: The Blue Loop lenses are NOT directional.
Image 22-10
22.2.7 390 Blue loop lens 4
1. 1. Remove screw (Tx08 M2.5x6)
114
Image 22-8
723–0016 F90 01/12/2017