Gp6 Periodical Maintenance; Service Interval Matrix; Service Kits Available - Barco F90 Service Manual

6. GP6 PERIODICAL MAINTENANCE

About
There are some components that have limited lifecycle and need to be replaced within specified intervals. By following those inter-
vals, the projector will maintain the original performance. Otherwise, the performance of the projector gradually will decrease. The
service components and their intervals are specified in the table below.
The GP6 Low Frequency Maintenance (LFM) schedule has 2 main service intervals: 20.000 hours and 40.000 hours.
Complete service kits are available for purchase, see chapter "Service Kits Available".
The components listed in the 20.000 hour interval must be also exchanged during the 40.000 hour interval
service.
Both intervals must be performed by authorized service technicians in controlled environments, typically in
a service center.
6.1

Service Interval Matrix

Refer to chapter "Scheduled operations", page 87 for detailed procedures describing replacement of service components.
The table below shows component which must be replaced at each service interval, the quantity needed, and the article number.
The item descriptions does not necessarily reflect the description in the parts list.
20.000 hour interval.
(20.000, 40.000, 60.000.....hours)
Component
Phosphor wheel fans
Fan PSU
Fan PCB
Fan optics
GP6 / GP7 Phosphor
wheel
GP6 / GP7 Color wheel
cassette, Brightness
GP6 / GP7 Color wheel
cassette, Color
GP6 / GP7 Laser cluster
blue
GP6 / GP7 Dumplight
XPS actuator assembly
6.2

Service Kits available.

In order to simplify the ordering of service components, complete service kits are available from the Barco service center, see table
below for more details.
Component Consisting of
723–0016 F90 01/12/2017
Pcs Article No
2 504-0544-xx
1 535–0005–xx
1 504–0624–xx
1 504–0625–xx
2 R9801433
1 R9801431
1 R9801432
2 R9801430
1 R8781693
Available complete service kits
20 000 hours
Kit Kit art. no.
needed
pr
ser-
vice
[pcs]
Service Interval Matrix
(40.000, 80.000, 120.000,... hours)
Component
Fan laser driver
Main system fans
Liquid cooling,
radiators
Liquid cooling, DMD
Component
6. GP6 periodical maintenance
40.000 hour Interval
Pcs Article No
1 504–0623–xx
5 504–0623–xx
4 504–0372–xx
1 504–0372–xx
40 000 hours
Consisting of Kit
needed
pr
ser-
vice
[pcs]
Kit art. no.
27