SC-F3000 Series
User's Guide
Setting Item
Print Head Nozzle Limita‐
tion
Supply Status menu
Setting Item
Ink/Waste Ink Bottle/Head Cleaning Set
Ink
Waste Ink Bottle
Head Cleaning Set
Others
Status menu
Setting Item
Firmware Version
Printer Name
Fatal Error Log
Operation Report
Control Panel Menu
Setting
*
Off
On
Setting
Setting
Explanation
Displays the selected information.
Printer Name is the name set in Epson Edge Dashboard.
Total Print Numbers
Total Carriage Pass
Explanation
When clogs are not cleared even after repeating Head
Cleaning, you can continue printing by using only the nozzle
rows that are not clogged.
When this function is turned On, printing time may increase
because printing is done using only half of all the nozzle rows
(upper side or lower side). There is also a risk of reduced print
quality. We recommend using this function only temporarily,
such as during the time until the Print Head can be replaced to
eliminate the clogged nozzles.
How to Select Restricted Nozzles
Print a check pattern using Print Head Nozzle Check, and then
confirm whether the nozzle row whose clogs cannot be cleared
is on the upper side or lower side, relative to the center of the
check pattern.
"Checking for clogged nozzles" on page 100
U
Put a check mark on the side (upper or lower) of the check
pattern where you can see clogged nozzles in the screen
showing, in order, the White then Color. Even if you cannot see
clogs in the White nozzle rows, put a check mark on the side of
the check pattern in which you can see clogs in the other colors,
and then proceed to the Color selection screen.
Explanation
Displays the remaining ink levels and ink part
numbers
Displays the space available in the Waste Ink Bottle
Displays the consumption level of the Wiper Unit
Displays the consumption level of the other
consumables (Anti-Drying Cap and Air Filter)
120