Table of Contents
Advertisement
User's Guide
System Administration
Select the menu on the control panel as described below.
Settings > General Settings > System Administration
Administrators use this feature. See the Administrator's Guide for details.
Menu Options for Print Counter
Select the menus on the control panel as described below.
Settings > Print Counter
Displays the total number of prints, B&W prints, and color prints from the time you purchased the printer.
Menu Options for Supply Status
Select the menu on the control panel as described below.
Settings > Supply Status
Displays the approximate level of the ink and service life of the maintenance box.
When the ! mark is displayed, ink is running low or the maintenance box is nearly full. When the X mark is
displayed, you need to replace the item as ink is expended or the maintenance box is full.
Menu Options for Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
Print Quality Adjustment:
Select this feature if there are any problems with your print outs. You can check for clogged nozzles
and clean the print head if necessary, and then adjust some parameters to improve print quality.
Print Head Nozzle Check:
Select this feature to check if the print head nozzles are clogged. The printer prints a nozzle check
pattern.
Print Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Print Head Alignment:
Select this feature to adjust the print head to improve print quality.
❏ Ruled Line Alignment
Select this feature to align vertical lines.
Preparing the Printer
57
Advertisement
Chapters
Table of Contents
