Table of Contents
Advertisement
User's Guide
Menu Options for Supply Status
Select the menu on the control panel as described below.
Settings > Supply Status
Displays the approximate level of the ink and service life of the maintenance box.
When
is displayed, ink is running low or the maintenance box is nearly full. When
to replace the item as ink is expended or the maintenance box is full.
You can replace ink cartridges or print supply status information from this screen.
Menu Options for Maintenance
Select the menus on the control panel as described below.
Settings > Maintenance
Print Quality Adjustment:
Select this feature if there are any problems with your print outs. You can check for clogged nozzles
and clean the print head if necessary, and then adjust some parameters to improve print quality.
Print Head Nozzle Check:
Select this feature to check if the print head nozzles are clogged. The printer prints a nozzle check
pattern.
Print Head Cleaning:
Select this feature to clean clogged nozzles in the print head.
Ruled Line Alignment:
Select this feature to align vertical lines.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers. The printer feeds paper to clean the
internal rollers.
Remove Paper:
Select this feature if there are still some torn pieces of paper inside the printer even after removing
jammed paper. The printer makes more space between the print head and the surface of the paper to
easily remove the torn pieces of paper.
Maintenance Roller Information:
❏ Maintenance Roller Status
Displays the status of the maintenance rollers for the selected paper cassette.
❏ Reset Maintenance Roller Counter
After replacing maintenance rollers, reset the counter for the paper cassette in which you replaced
the maintenance rollers.
Preparing the Printer
55
is displayed, you need
Advertisement
Table of Contents
