SC-F3000 Series
User's Guide
When to perform
When You need to replace Ink Supply
Unit. appears on the control panel screen.
Other maintenance
When to perform
❏
Before starting printing operations
for the day (WH only)
❏
Ink shaking is needed.
Shake the Ink Supply Unit which
/
is displayed. is displayed
❏
When the LED lamp on the Ink Unit is
flashing blue
❏
When checking if nozzles are clogged
❏
When checking which colors are
clogged
❏
Horizontal stripes or tint unevenness
(banding) are appeared.
❏
When printouts are blurred or parts
are missing
❏
When a clog is found after checking
for clogged nozzles
When changing the printer mode
When the printer will not be used for an
extended period (and switched off)
Maintenance
Component to be replaced
C
Ink Supply Unit
"Shaking and Replacing Ink Supply Units" on page 89
U
Operation
Shaking the Ink Supply Unit
"Shaking" on page 89
U
Checking for clogged nozzles
"Checking for clogged nozzles" on page 100
U
Cleaning the print head
"Head Cleaning" on page 101
U
Changing the printer mode
"Changing the Printer Mode" on page 102
U
Pre-Storage Maint.
"Pre-Storage Maintenance for Long-Term Non-Use" on page 103
U
78