Rear Section - Epson SC-F3000 Series User Manual

SC-F3000 Series User's Guide

Rear Section

A
Vent
Allows air to flow into the printer. The vents are on both the left and right sides. Do not block the vents.
B
Connector Cover
Do not open and close this after the ink unit's connector is connected to the printer during setup.
C
AC Inlet
Connect the power cable supplied with the printer here.
D
Optional Port
Connect the connection cable supplied with the ink unit.
E
USB Port
Connect the USB cable here.
F
LAN Port
Connect the LAN cable here. Use a shielded twisted pair cable (category 5 or higher).
Introduction
10