Function Summary; Closing; Uninstalling Software - Epson SC-F3000 Series User Manual

SC-F3000 Series User's Guide

Function Summary

This section introduces the main functions of Web
Config.
❏ Check the printer's status, such as the remaining
amount of ink.
❏ Check and update the printer's firmware version.
❏ Configure the printer's network settings and
advanced security settings, such as SSL/TLS
communication, IPsec/IP filtering, and
IEEE802.1X, which cannot be configured with the
printer alone.

Closing

Close the Web browser.

Uninstalling Software

c
Important:
❏ Log into a "Computer administrator" account
(an account with administrative privileges).
❏ Enter the administrator password when
prompted and then proceed with the remainder
of the operation.
❏ Exit any other applications that may be
running.
Windows
This section describes how to uninstall Epson Edge
Dashboard and the Epson communications drivers
using them as an example.
Introduction
A
Turn off the printer, and disconnect the cable
from the computer.
B
On the computer on which the software is
installed, click Control Panel, and then click
Uninstall a program from the Programs
category.
C
Select the software you want to remove and then
click Uninstall/Change (or Change/Remove).
By selecting SC-F3000 Series Comm Driver
Printer Uninstall, you can delete Epson
communications drivers.
To uninstall Epson Edge Dashboard, select
Epson Edge Dashboard.
D
Select the target printer icon, and then click OK.
E
Follow the on-screen instructions to continue.
When the delete confirmation message appears,
click Yes.
If you are reinstalling the Epson communications
drivers, restart the computer.
Mac
The following describes how to remove Epson Edge
Dashboard.
A
Quit Epson Edge Dashboard.
B
Double-click Applications - Epson Software -
Epson Edge Dashboard - Epson Edge
Dashboard Uninstaller.
Follow the on-screen instructions to continue.
35