Epson SC-F3000 Series User Manual page 66

SC-F3000 Series User's Guide
D
Remove the frame from the platen.
E
Pass the platen through the T-shirt sleeve.
F
Pull the parts of the shirt that extend beyond the
platen to flatten the print surface.
Basic Printing
c
Important:
❏ Load the T-shirt so that the side seams and
sleeve seams are not on the top. If there are
raised sections, such as seams, an error
may occur, or the print quality may
decline.
❏ Do not pull too hard on the T-shirt. If the
T-shirt is stretched too much, the print
quality may decline due to deformed
images and so on, and the white
under-base print may extend outside the
image.
G
Attach the platen frame again.
Load it so that the small holes in the frame are at
the front and back.
H
Pull the T-shirt outside of the frame to remove
any creases and slack.
66