Epson SC-F3000 Series User Manual page 91

SC-F3000 Series User's Guide
D
Place the new ink supply unit into the tray and
lower the handle.
E
While the ink supply unit is in the tray, as shown
in the illustration below, carefully shake it by
tilting it up and down at about a 60 degree angle 5
times in 5 seconds.
In the case of WH, shake it well approx. 25 times
in 25 seconds.
You do not need to shake the ML and cleaning
ink supply unit.
F
Match the color on the label on the ink supply
unit with the label on the ink unit, and then fully
insert the tray.
Maintenance
G
Move the lock switch to the left to lock it.
Repeat steps 2 to 7 to replace other ink supply
units.
c
Important:
Place ink supply units in all the trays, and then
insert them into the ink unit. Printing is not
possible if, for even one color, an ink supply
unit is not loaded into a tray or a tray is not
inserted into the ink unit.
DisposalU
91
"Disposal" on page 105