Epson SC-F3000 Series User Manual page 8

SC-F3000 Series User's Guide
C
Platen
A plate for loading T-shirts. As well as the platen supplied with the printer, there are five optional platens available
to suit the size and purpose of the print job.
"Options and Consumable Products" on page 133
U
D
Platen Gap Lever
Use to adjust the platen's position. The height can be selected from 9 levels.
"How to change the platen position" on page 58
U
E
Movable Base
Moves the platen to the print position and the T-shirt loading position.
F
x button (Start button)
Press to start printing. The button becomes a lamp that lights or flashes to indicate the printer is ready to start
printing.
On : Ready to print.
Flashing : Printing.
G
button (Pause button)
If you press this button after a job has been sent, the Cancel Job confirmation screen is displayed. You can cancel the
current print process by selecting Cancel.
If you press this button while a message or menu is displayed, the message or menu is closed and you are returned to
the Ready screen.
H
} button (Platen Move button)
Press this button while the platen is in front of the printer to move it inside the printer. When you press this button
when the platen is inside the printer, the platen moves to the front. Press it while the platen is moving to stop it.
I
Emergency Stop Button
They are on the left and right sides of the movable base. Press them in an emergency to stop the platen and cut off the
power supply.
"Emergency stop button was pressed" on page 132
U
J
Casters
There are two casters each on the left and right side legs. Once installation is complete, the front casters should be
kept locked while the printer is in use.
K
Adjustable feet
There are two adjustable feets each on the left and right side legs. Once installation is complete, be sure to lower
them to the floor before using the printer.
U Setup Guide (booklet)
Introduction
8