SC-F3000 Series
User's Guide
Overview
This section explains the basic workflow from preparing a T-shirt before printing to fixing the ink after printing.
The following shows the procedure for sending a job from the Garment Creator for SC-F3000 Series, which is
provided, to the printer and then printing it on a T-shirt.
Before Printing
Pre-treatment
Creating and Sending Jobs
Preparing the Platen
Loading the T-shirt (media)
Printing
Fixing the Ink
Basic Printing
Perform these steps before you start printing operations to maintain print quality.
U
Apply pre-treatment liquid to the T-shirt when printing using White ink on cotton T-shirts,
or when printing on polyester T-shirts.
U
Lay out images in the Garment Creator for SC-F3000 Series, which is provided, and then
send the job you created to the printer.
U
Attach the platen for printing to the printer.
U
Load the T-shirt on the printer.
U
Confirm that the x button is lit before you start printing.
"Starting and Canceling Printing" on page 70
U
Remove the T-shirt from the printer, and fix the ink.
"Fixing the Ink" on page 72
U
38