Introducing The Supplied Software; Supplied Software - Epson SC-F3000 Series User Manual

SC-F3000 Series User's Guide

Introducing the Supplied Software

Supplied software

The following table shows the software that is supplied.
Windows versions are provided on the software disc that is supplied. If you are using a Mac or a computer without a
disc-drive, you can download and install the software from the following link: http://epson.sn.
For information about the software, see the manual for the application or the Network Guide (Online Manual).
Note:
Printer drivers are not provided. To print, you need software for the printer; Garment Creator for SC-F3000 Series or
software RIP.
The Epson Web site provides plug-ins for the printer.
Software Name
Garment Creator for
*
SC-F3000 Series
Garment Creator Easy Print
*
System
(Windows only)
*
Epson Edge Dashboard
EPSON Software Updater
Epson communications
drivers
(Windows only)
Introduction
Summary
❏
You can load images created with commercially available drawing software, make the
following settings, and then create jobs.
❏
Set the position and size of the image according to the platen size used for printing.
❏
Set the Print Quality and so on
❏
You can send created jobs to the printer or save them to your computer.
"Creating and Sending Jobs" on page 46
U
This software allows you to create a hot holder for printing. By simply copying an image file to the
hot folder, you can automatically create a print job and send it to the printer. This is useful when
frequently printing using the same print and layout settings. Install this software on the computer
on which Garment Creator for SC-F3000 Series is installed.
❏
You can easily acquire the following variety of information provided by Epson on the
internet.
❏
Update information for the printer firmware (you can update the firmware easily from
Epson Edge Dashboard)
❏
Update information (when update information is available, start EPSON Software
Updater to perform the update) for software and manuals installed from the supplied
software disc and setup navigator.
❏
Information from Epson
❏
With Epson Edge Dashboard installed, you can monitor the status of the printer connected to
a computer over a network or USB connection.
"Using Epson Edge Dashboard" on page 29
U
The software checks if new software or update information is available on the Internet and installs
it if it is available. It can also update the printer's manuals, Garment Creator for SC-F3000 Series,
and Epson Edge Dashboard.
Epson communications drivers is required to use Epson Edge Dashboard, or Garment Creator for
SC-F3000 Series, and when a computer is connected to the printer via USB. Make sure these are
installed.
27