Epson SC-F3000 Series User Manual page 114

SC-F3000 Series User's Guide
Setting Item
Printer Mode
Head Movement
Range
Inside Light
Restore Default Set‐
tings
Maintenance Setting
Cleaning Setting
Threshold Of Clogged Nozzles
White
Color
Max Retry Cleaning
Count
Nozzle Compensation
Control Panel Menu
Setting Explanation
* You can switch the ink mode used when printing.
White ink mode
You can reduce consumption of WH ink by changing to Color ink mode
Color ink mode
for a specified period of time during which WH ink is not used for any
printing.
For details on execution conditions and procedure, see:
U
* You can set the range in which the print head moves during printing.
Data Width
With Data Width, the print head moves in the range of the width of the
Printer Width
data. Narrowing the range of print head movement increases print speed.
With Printer Width, the print head moves in the range of the largest
media supported by the printer. Set this option if you need print quality
that is more uniform and consistent.
* Select whether the inside light turns on and off automatically.
Auto
With Auto, the light automatically turns on for operations that need light,
Manual
such as while printing, and turns off when that operation is complete.
With Manual, the light turns on and off only when you press
control panel. When you press
the light to turn on, the light turns on as soon as possible.
Network Settings
Selecting Network Settings returns just the values set in General
Settings - Network Settings to their default setting values.
Clear All Data and
Selecting Clear All Data and Settings returns all the values set in the
Settings
printer's menus to their default settings.
The printer monitors the condition of the print head nozzles while
printing. These setting items are for settings related to the maintenance
*
(Head Cleaning) that is performed when clogged nozzles are detected.
1 to 8000 (50 )
Threshold Of Clogged Nozzles sets whether maintenance is
*
1 to 6400 (50 )
implemented when a certain number of nozzles become clogged, for
each of the White and Color print heads.
*
0 to 2 (0 )
Max Retry Cleaning Count sets the number of times maintenance is
repeated if nozzles are still clogged after doing maintenance one time.
* The printer monitors the condition of the print head nozzles while
On
printing. These setting items set whether to print by supplementing ink
from normal nozzles when enough ink is not output from clogged nozzles
Off
when clogged nozzles are detected.
By selecting On, printing is done while normal nozzles compensate for the
ink that could not be ejected by clogged nozzles. However, print time may
become longer than normal, depending on the number of clogged
nozzles.
"Changing the Printer Mode" on page 102
114
during an operation that does not allow
on the