Epson SC-F3000 Series User Manual page 45

SC-F3000 Series User's Guide
*1 The optimum conditions vary depending on the
type of heat press such as the manual adjustment
type. Be sure to test the ink fixing result in advance
to find the right pressure.
*2 If the application area for the pre-treatment liquid
is larger than A4, it may not dry even after 60
seconds. Try extending the time up to 90 seconds
while checking if the pre-treatment liquid is dry.
c
Important:
❏ Make sure you dry the pre-treatment liquid
thoroughly. Insufficient drying time may cause
the print quality to decline.
❏ Do not wet the T-shirt or leave it in a humid
location for a long time after fixing the
pre-treatment liquid. Color development
deteriorates in the wet areas causing
unevenness.
If the T-shirt is left for an extended period of
time in such conditions, press for 5 to 10 seconds
to dry it just before printing.
Note:
If traces of the pre-treatment liquid are visible, try
washing in water; however, the effects depend on the
material of the T-shirt.
Basic Printing
45