Epson SC-F3000 Series User Manual page 117

SC-F3000 Series User's Guide
Setting Item
Print Head Alignment
Standard
Micro Adjust
Media Feed Adjust‐
ment
Media Management
Control Panel Menu
Setting Explanation
Do adjustments when print results appear grainy or unfocused (lines are
misaligned, small text is uneven).
-8 to +8
This adjustment adjusts small misalignments in the positions that ink is
output during bi-direction printing. In the following situations, print
-10 to +10
results are not improved even if you do these adjustments.
❏
❏
See the following for more details.
U
-1.00 to 1.00% Do this adjustment when horizontal stripes (banding) appear in the print
results.
Use this adjustment to adjust how far (width) the platen feeds between
each movement of the print head.
When the banding colors are dark, change the values to the + side; when
the colors are faint (whitish), change them to the - side. First set 0.1% (or
-0.1%), and check the printout, then do further adjustments as needed.
Read the following before doing these adjustments.
U
Print Direction is set to Uni-Direction (Low Speed) in Garment
Creator for SC-F3000 Series, the specialized software for the printer.
When doing repeat printing or printing from a USB memory, Current
Settings - Head Move Direction is set to Uni-Directional.
"Execute Print Head Alignment" on page 128
"Precautions when executing Print Adjustments" on page 127
117