Epson SC-F3000 Series User Manual page 69

SC-F3000 Series User's Guide
G
Attach the platen frame again.
H
Remove any lint from the printing surface, and
press the fibers flat.
There may be lint on the media if you have not
applied pre-treatment liquid. Remove the lint
using the sticky tape or roller and press the fibers
flat using the hard roller. Lint and fibers may stick
to the print head and stain other areas.
Basic Printing
I
Pull the T-shirt outside of the frame to remove
any creases and slack.
c
Important:
Stretch the media so that there are no creases
or slack. However, if the T-shirts is stretched
too much, the print quality may decline due to
deformation of the image, and the white
under-base print may extend outside the
image.
J
Press down the frame of the platen so that it does
not become loose.
K
Tuck in the T-shirt around the frame so that it
does not drape over the movable base.
69