Epson SC-F3000 Series User Manual page 115

SC-F3000 Series User's Guide
Setting Item
Actions Beyond
Threshold of Missing
Nozzles
Periodic Cleaning
Scheduled
Print Page
*
Off
Power On Cleaning
Network Settings
Network Status
Connection Check
Control Panel Menu
Setting Explanation
Stop Printing Set the operation for when the number of clogged nozzles exceeds the
number set in Cleaning Setting - Threshold Of Clogged Nozzles.
*
Show Alert
Stop Printing displays the The Print head may require maintenance. It
is recommended to perform a Print Head Nozzle Check before
Auto Cleaning
printing. message on the control panel screen, and then stops printing
and stands by.
Show Alert displays the above message on the control panel screen, but
continues printing without stopping.
Auto Cleaning performs maintenance before printing starts.
*
You can set either time (minutes) or number of pages printed for the
1 to 9999 (60 )
timing at which to perform cleaning so as to keep the print head nozzles in
optimum condition.
*
1 to 9999 (50 )
Periodic cleaning is not done if you select Off.
*
Set whether the printer automatically performs cleaning when the power
On
is turned on so as to keep the print head nozzles in optimum condition.
Off
Wired LAN Status You can check all the information for the various network settings that are
set in Advanced.
Print Status Sheet
Selecting Print Status Sheet prints a list of the settings.
Diagnoses the current state of network connections, and displays the
results.
115