SC-F3000 Series
User's Guide
Enlarging and reducing
After you have finished the settings, send the job to the
printer.
Sending and printing jobs
A
Specify the number of prints on the bottom of the
settings area, and then click the Print button.
B
When the printer has finished receiving a job, the
preview display opens on the printer's screen and
the x button lights.
See the following, and load a T-shirt (media) and
start printing.
"Load the T-shirt (media)" on page 59
U
Notes on Receiving Jobs
Only the following operations are possible while is
receiving jobs. If buttons do not respond when
operating the control panel, the printer may be
receiving a job; wait for a while and then try again.
❏ Canceling a job
Basic Printing
❏ Moving the movable base (platen)
❏ Turning off the power
Note:
❏ After canceling a job, it takes a while before the
printer is ready to print again.
❏ It takes a while to turn off the printer after
performing the power off operation. Also, jobs that
have been received are deleted.
53