Epson SC-F3000 Series User Manual page 64

SC-F3000 Series User's Guide
I
Pull the T-shirt outside of the frame to remove
any creases and slack.
c
Important:
The printer detects the highest part of the print
surface and adjusts the height. If there are any
creases or slack near the inside edge of the
frame as shown in the diagram below, the
distance between the print head and the print
surface may increase and print quality may
decline. Stretch the T-shirt so that there are no
creases or slack. However, if the T-shirts is
stretched too much, the print quality may
decline due to deformation of the image, and
the white under-base print may extend outside
the image.
Note:
Using the platen frame to place the print surface
under a suitable amount of tension can reduce
swelling of the print surface while printing.
Basic Printing
J
Press down the frame of the platen so that it does
not become loose.
K
Tuck in the T-shirt around the frame so that it
does not drape over the movable base.
Using the supplied hook
Attaching the hook supplied with the printer as shown
in the illustration allows you to hang the frame removed
from the platen.
64