Loading On A Platen Without A Grip Pad - Epson SC-F3000 Series User Manual

SC-F3000 Series User's Guide
H
Tuck in the T-shirt so that it does not drape over
the movable base.
Loading on a Platen without a
Grip Pad
When loading a T-shirt (media) on a platen without a
grip pad, use the frame supplied with the platen.
You can check the procedure in a video on YouTube.
Epson Video Manuals
A
Press the P button to turn on the printer.
B
Check that the platen is ejected forward.
If it is not ejected, press the } button to move the
platen forward.
C
On the printer's screen, confirm that the platen
position is as shown below.
Basic Printing
When Platen Gap is set to Auto:
The optimum platen position varies depending
on the thickness of the media. Use the following
guideline to change the platen position.
Media thickness
0 mm to 4 mm
4 mm to 7 mm
7 mm to 10 mm
10 mm to 13 mm
13 mm to 16 mm
16 mm to 19 mm
19 mm to 22 mm
22 mm to 25 mm
25 mm to 29.5 mm
When Platen Gap is set to Manual:
The optimum platen position varies depending
on the thickness of the media being loaded and
the type of platen being used. See the following
for more details.
"Table for Platen Gap setting values for
U
media thicknesses" on page 142
See the following for how to change the platen
position.
"How to change the platen position" on
U
page 58
D
Remove the frame from the platen.
62
Platen position
P
1
2
3
4
5
6
7
8