Section 2 - Controls, Instruments And Operation; Cab And Controls; Emergency Exit - New Holland CX720 Operator's Manual

SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION

Emergency exit

The emergency exit is to be found on the right-hand
side of the operator's seat, opposite to the door that
gives access to the cab.
To escape from the cab through the emergency exit,
proceed ad follows:
• Unlock the emergency exit door handle in three
steps.
1. Flip down the handle until it is in horizontal
position.
2. Push the door slightly open until the metal pin
that is attached to the cab frame is visible
through the notch in the handle.
3. Flip up the handle in order to release the
handle from the pin.
Open the emergency exit door completely.
•
(is secured with a chain)
• Step over the right-hand module and leave the
cab.
Use the handgrip (1) as handholds, the step (2)
•
and the traction tyre to step on.
An additional notch (1) is foreseen in the emergency
exit door handle to set the door in a fixed open
position.

CAB AND CONTROLS

1
2
3
2–1