SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
7. Engine
In this sub-menu the operator can set following items:
•
Rotary screen brush
•
Engine RPM low alarm
NOTE: The other items mentioned are factory-set
and does not need to be changed.
Rotary screen brush
•
If press "enter" when this item is selected, a pop-up
screen appears, showing the two possibilities
"Installed" or "Not installed".
Using the "up" or "down" navigation keys to select and
press "enter" to confirm your choice.
•
Engine RPM low alarm
To change the value, using the "+" and "–" navigation
keys and press enter to store.
Factory set=1950 rpm
2–138
246
247