SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
Start module
The start module is located to the right and to the back
of the operator's seat.
1.
The ignition key has three or four positions:
a Accessories (if installed)
b Off
c
Contact
d
Engine starter motor
2.
Cigarette lighter
3.
Indicator light for cold start preheater (if installed)
4.
Diagnostics port for off-board diagnose and software
download.
5.
12 volts DC socket (only current with ignition key in
contact position)
NOTE: Do not leave the cab with the ignition key in
"accessories" position for a long time.
Mirror heating can decharge the batteries if the mirror
heating tumbler switch is in "on" position.
NOTE: When the ignition key is moved to the
"contact" position, the back-up alarm will be sound for
one second and the beacon lights (if equipped) will be
activated for 2.5 seconds.
15
2–17