SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
14. Select the "Beacon mode" screen (5) (fig. 131)
by using the right navigation key. Using the up
and down navigation keys gives the possibility to
select the location.
•
Auto range mode
•
Auto power mode
•
Disabled mode
•
Manual frequency mode
15. Press "enter" to confirm the selection.
16. Select the screen (6) (fig. 131) by using the right
navigation key. Using the up and down navigation
keys gives the possibility to select the location.
•
Europe / Middle East
•
South America / Asia
•
North America East
North America West
•
•
Optus – Aus / NZ
Asia / South America
•
Africa
•
17. Press "enter" to confirm the selection.
NOTE: Go to screen (7) and (8) to check the satellite
frequency and the baud rate.
Fore more information, refer to the operator's manual
"TRIMBLE NH 134".
18. To go back to home screen (1) (fig. 130), press
"esc" several times.
2–81