Cleaning - New Holland CX720 Operator's Manual

SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION

14. Cleaning

In this sub-menu the operator can set following items:
• Sieve loss sensitivity
• Upper sieve type
• Lower sieve type
• Longitudinal inclination
Remote upper sieve
•
• Remote lower sieve
NOTE: The other items in the cleaning sub menu are
factory-set and should not be changed.
• Sieve loss sensitivity
To change, proceed as follows:
1. Enter to the information box and select "Sieve
loss sensitivity".
2. To change the value using the "+" and "–" keys
and press "enter" to store.
289
290
2–155