New Holland CX720 Operator's Manual page 56

SECTION 1 – GENERAL INFORMATION AND SAFETY
6. The grain tank is accessible through the open
grain tank covers using the steps (4).
CAUTION
Shut off the engine and remove the ignition key
before entering the grain tank.
CAUTION
Never climb in the grain tank from the front side.
7. Once inside the grain tank, remove the cover (5)
to gain access to the engine compartment.
8. Remove the cover (4) to gain access to the grain
flow sensor (if installed).
9. Shielding (left and right-hand side).
To open: Turn first the nut a quarter clockwise
with the special tool to unlock the shielding and
pull then the support (1) together wit the handle
to open the shielding completely.
NOTE: If not, using the support (1), the shielding can
not be opened completely.
27
28
29
30
1–37