New Holland CX720 Operator's Manual page 242

SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
In cab printer (If installed)
With this printer is it possible to make a hard copy
print out of certain screens selected on the InfoViewt
monitor.
To use the printer, proceed as follows:
1. Connect the electric wires with the printer and the
diagnostics port as shown.
2. Hang up the printer near the start module as
shown (if foreseen).
3. Set the ignition key 1 in "contact" position.
4. Press button 2 to start-up the printer.
5. Using the navigation keys to select (sub-menu)
on the InfoViewt monitor the screen of which
you wish to have a hard copy print out.
6. Press the dot "." button of the alphanumeric
keypad.
7. The printer starts printing now.
NOTE: Press the paper feed button 3 to scroll paper.
NOTE: To change paper, open the cover 4.
NOTE: Some screens can not be printed.
323
324
325
2–169