4. To disconnect the hydraulic quick-couplers,
proceed as follows:
•
Disconnect first hydraulic quick-couplers 1
and 2.
Disconnect final quick-coupler 3.
•
IMPORTANT: Avoid possible oil contamination by
properly fitting the blanking plugs into the hydraulic
quick-couplers.
5. Swing lever 1 upwards to open stone trap 2.
6. Remove the shielding on the right-hand side of
the straw elevator.
7. Loosen idler 1 to remove the straw elevator drive
belt.
SECTION 3 – FIELD AND SITE OPERATION
40
41
42
3–39